BRAKE PEDALS OPERATION Pedals (22) operate the brakes. Use the brake pedal for normal braking operations. The left and right pedals are interconnected and work together. Brake Pedal (right) This pedal is used for normal braking operations including traveling with the machine or slowing the machine down. Depress the pedal to slow or stop the machine. Brake Pedal (left) This pedal works in conjunction with the right brake pedal on the machine. It is used to stop the machine and aid in loader operations when the engine speed must be at a high RPM due to a heavy load in the bucket.
By depressing this pedal and using the accelerator pedal at the same time in coordination, controlled loader operations are possible. ACCELERATOR PEDAL Pedal (23) controls the engine speed and output. The engine speed can be freely controlled between low idle RPM to full speed RPM. PARKING BRAKE LEVER Lever (24) operates the parking brake. Pull the lever up to the LOCK position to set the parking brake. At the same time, the parking brake warning lamp will light up. To release the brake, pull the lever up slightly, then press button (A) in and return the parking brake lever down to the FREE position. At the same time, the parking brake warning lamp will go out.
Never use the parking brake to stop the machine unless necessary in an emergency situation. Remark If the directional lever is placed in the FORWARD or REVERSE position with the parking brake applied, the central warning lamp will light up and the buzzer will sound. Before operating the directional lever, check that the parking brake lever is in the FREE position. When the parking brake is applied, the machine will not move even if the directional lever is operated. WA320PT-5L 2-31