Breathing Masks, Ear Protection May Be Required Do not forget that some risks to your health may not be immediately apparent. Exhaust gases and noise pollution may not be visible, but these hazards can cause disabling or permanent injuries. NOTE: The equivalent continuous A-weighted sound pressure level at the workstation for this machine is 73 dB(A). Measurement is obtained on a dynamic machine following the procedures and cabin conditions as described in ISO 6396. NOTE: The guaranteed sound power level emitted by the machinery for this machine is 103 dB(A). Measurement is obtained on a dynamic machine with the procedures as described in 2000/14/EC. Vibration Level Information Hands/Arms:
The weighted root mean square acceleration to which the hands/arms are subjected, is less than 2.5 m/s 2 . Whole body: The weighted root mean square acceleration to which the whole body is subjected, is less than 0.5 m/s 2 . Measurements are obtained on a representative machine, using measuring procedures as described in the following standard: ISO 2631/1. ISO 5349, and SAE J1166. Recommendations for Limiting Vibrations 1. Select the right machine, equipment and attachments for a particular application. 2. Replace any damaged seat by a DOOSAN genuine part. Keep the seat maintained and adjusted. Adjust the seat and suspension for the weight and size of the operator.
Inspect and maintain the suspension and adjustment mechanisms of the seat regularly. 3. Check that machine is properly maintained. Tire pressure, brakes, steering, linkages, etc. 4. Steer, brake, accelerate, shift gears, move the attachments and load the attachments smoothly. 5. Adjust the machine speed and travel path to reduce the vibration level. Slow down if it is necessary when traveling through rough terrain. OP001759 1-17 Safety