Operations on Slopes When working on slopes. there is danger that the machine may lose its balance and turn over, when swinging, or when work equipment is operated. Always carry out these operations carefully. Do not swing the work equipment from the uphill side to the downhill side when the bucket is loaded. This operation is dangerous. If the machine has to be used on a slope, pile the soil to make a platform that will keep the machine as horizontal as possible. FG000212 Figure 27 In addition, lower the bucket as far as possible, keep it pulled into the front, and keep the swing speed as low as possible.
Parking Machine Avoid making sudden stops, or parking the machine wherever it happens to be at the end of the workday. Plan so the excavator will be on firm, level ground away from traffic and away from high walls, cliff edges and any area of potential water accumulation or runoff. If parking on inclines is unavoidable, block the crawler tracks to prevent movement. Lower the bucket or other working attachment completely to the ground, or to an overnight support saddle. There should be no possibility of unintended or accidental movement.
120 Block When parking on public roads, provide fences, signs, flags, or lights, and put up any other necessary signs to ensure that passing traffic can see the machine clearly. Park the machine so the machine, flags, and fences do not obstruct traffic. Unlock After the front attachment has been lowered to an overnight storage position and all switches and operating controls are in the "OFF" position, the safety lock lever must be set to the "LOCKED" position. This will disable all pilot circuit control functions. FG000666 Lock Figure 28 Always close the door of the operator's cabin.
Never Let Anyone Ride on Attachment Never let anyone ride on any work attachment, such as the bucket, crusher, grapple, or clamshell (grab bucket). There is a potential danger of the person falling and suffering serious injury. ARO1310L Figure 29 OP001759 1-33 Safety