SECTION 5 MAINTENANCE Page 54 5.18. TRANSMISSION SYSTEM Fig. 5.44. Transmission System Breather 5.18.5. SERVICING TRANSMISSION SCAVENGER STRAINER Fig. 5.45. Transmission Scavenger Oil Strainer 1. Hose with Filter Strainer 2. Intake Pipe with Scavenger Pump With the transmission system drained after 1000 hours of operation as described in „Maintenance Schedule”, remove the scavenger oil strainer and clean as described below: 1. To gain access to the oil strainer first remove the center cover in floor of cab. 2. Disconnect the transmission scavenger hose (1) from the intake pipe (2). 3. Remove the strainer from the hose (1). 4.
Clean the strainer with a nonflammable commercial cleaning solvent. 5. Reinstall the strainer into hose (1). 6. Reinstall the transmission scavenger hose to the pipe (2). Make sure that filter strainer is properly seated in the hose. 7. Reinstall the center cover. TD-20H DRESSTA