DRESSTA TD20H98/1E — 4.5.5. TRANSMISSION SHIFT LEVER

SECTION 4 OPERATING Page 12 4.5. CONTROLS AND ADJUSTMENT This lever (A) is used to start the engine, control this speed of the engine or to shut it off. Push this lever forward (B) to decrease engine speed. Pull the lever back (C) to increase engine speed. Position lever in this large cutout (D) to shut down the engine. 4.5.4. TRANSMISSION NEUTRAL LOCK LEVER Fig. 4.7.

Transmission Controls A – Transmission Neutral Lock Lever B – Lever Rearward to Lock Shift Lever C – Lever forward to release shift lever D – Transmission Shift Lever This lever (A) is used to lock the transmission shift lever in “NEUTRAL.” Move the lever backward (B) (ON position) to lock the shift lever, or forward (C) (OFF position) to release. When starting or idling the engine with the transmission in NEUTRAL place the lock lever in the ON position. 4.5.5. TRANSMISSION SHIFT LEVER Lever (D) is used to select the various transmission gear ranges. Refer to “DRIVING THE MACHINE.” NOTE:

When the shift lever is placed in one of the reverse positions, the back-up alarm will automatically sound. TD-20H DRESSTA