hyundai — Trainingshandbuch PF2501-2601englisch-02.10-unvollst

DANGER! Risk of death! Immediately after completing the towing process, secure the compaction roller against rolling by means of the wheel chocks. After the towing process, the hydraulic circuit between the traction pump and the traction motor must be closed and the parking brake needs to be put in working order again. HR70C-9: In order to activate the HP valves ( 1 and 2 ), screw off the socket head screw and tighten the counter nut. After towing the compaction roller, you need to activate the parking brake in the rear axle again. The hand pump ( 5 ) is situated in the engine compartment, on the left side (direction of motion). Slowly open the relief valve ( 4 ).

The oil pressure escapes in the tank and the parking brake is activated, which is con fi rmed by the display on the dashboard, where the corresponding symbol ( 6 ) needs to light up. Towing 11 - 5 Issue: 02-10 Access the HP valves from the left side of the engine compartment (direction of motion). HR110 /120/1 40C-9: Completely screw in the socket head screw ( 10 Nm ). 1 Closing the HP valves at the traction pump Securing the vehicle against rolling Activating the parking brake HR70C-9: 4 mm socket head wrench HR 110/120/140C-9 : 5 mm socket head wrench 6 11.1.4 After the towing process 2 5 3 4