hyundai — Trainingshandbuch PF2501-2601englisch-02.10-unvollst

X X X X fi cally trained staff X X X X X 0 0 0 2 0 0 0 1 X X X X X X X X X 5.2.9 HR70C-9: Perkins Diesel engine maintenance schedule at intervals of ... operating hours (max. permissible period of time) 500 or every 12 months 250 or every 6 months 8 or daily at interv als of ... operating h ours (max. permis sible perio d of time) Requiredmeasures 8 or daily 250 or every 6 months 500 or every 12 months 1000 2000 3000 X Check the coolant level. X Check the coolant concentration. At intervals of 2 years, replace the anti-freeze agent. In case corrosive agent is used instead of anti-freeze agent, replace it at intervals of 6 months. Be sure you use the correct quantity.

X Check the condition and the tension of the drive belt. X Replace the drive belt of the generator. X Drain the water from the preliminary filter (in case your vehicle is equipped with this feature). X Replace the fuel filter element. X Check the functioning of the injection nozzles. To be carried out by specifically trained staff only! X Check the engine oil level. X Replace the engine oil (fill it in slowly, be sure to add the correct quantity. For a load factor above 40% or the use of en- gine oil that does not correspond to the required specifications, adjust the intervals accordingly. Please consult your local Perkins representative for information on the calculation of the load factor.

X Replace the engine oil filter. X Clean the air filter and empty the dust collector of the air filter, if a high accumulation of dust is caused by the operating conditions. X Replace the air filter and empty the dust collector of the air filter (normal operating conditions). X Clean the turbine and the compressor housing of the turbo charger. To be carried out by specifically trained staff only! X Check the valve play. If necessary,l adjust it. To be carried out by specifically trained staff only! X Check all hoses and connections. X Replace the breathers. X Check the starter and the generator. To be carried out by specifically trained staff only!

X Make sure the wiring of the electrical system is in good condition and check for signs of wear & tear. X Check for engine damage and leaks (repair, if necessary).