7.1.9 Speeds, hydraulic measuring and adjustment values for compaction rollers 7.1.10 Overview of the measuring points and prerequisites of measurement Drum and rear axle 7 -10 Issue: 02-10 Measurement/Adjustment Adjustment values HR70C-9 Adjustment values HR110/120C-9 Adjustment values HR140C-9 Measuring point Diesel engine idling speed min. -1 950 - -1,000 min -1 900 min -1 900 min Diesel engine Supply pressure 26 bar 26 bar 26 bar HP Diesel engine idling speed max. -1 2300 - -2,400 min -1 2,300 min -1 2,500 min Diesel engine Supply pressure 30 bar 30 bar 30 bar HP Diesel engine speed max.
-1 2100 - -2,200 min -1 2,200 min -1 2,400 min Diesel engine Traveling drive forward 460 bar 460 bar 460 bar MA Diesel engine speed max. -1 2100 - -2,200 min -1 2,200 min -1 2,400 min Diesel engine Traveling drive reverse 460 bar 460 bar 460 bar MB Roller speed max. 6.21 mi/h 50 m in 17s -19 s 7.46 mi/h 50 m in 14s - 16s Test track/Stop watch HP MB MA HR110/120/140C-9 HR70C-9 a ATTENTION! To enable measurement of the speeds and hydraulic HP MB oil pressures the Diesel engine must have reached its operating pressure and the hydraulic oil 50° C min. in the supply circuit. d NOTE! Determining the maximum roller speed: Travel a defined distance of 50 m at a max. roller MA speed reached before.
Measure the time required with stop watch. HR110/120/140 C-9 a ATTENTION! To enable measurement of the speeds and hydraulic oil pressures the Diesel engine must have reached its operating pressure and the hydraulic oil 50° C min. in the supply circuit.