Komatsu — HANDLING AUTO AIR CONDITIONER

. OPERATION EXPLANATION OF COMPONENTS air is dirty. CONTROL METHOD air 3 - 88 RECIRC/FRESH SELECTOR S WITCH Use this switch (6) to switch b etween recirculation of the air inside the cab and intake of fresh ai r from outside. When this switch is pressed, recirculation of inside air is selected and (A) lights up on the displa y monitor. If the switch is pressed again, intake of fresh air is selected and (B) lights up on the display monit or. Recirculation of air inside cab s circulated. Use this setting when Only the air inside the cab i carrying out quick cooling or h eating of the cab or when the outside Intake of fresh air from outsid e into the cab.

Use this setting when Air from the outside is taken taking in fresh air from outside or when removing the mist from the windows. COOLING OPERATION (1) of the air conditioner to turn the et the air flow to "Hi". ol switch (3) to set to the desired itch (4) to turn the air conditioner 1. Press main power switch power ON. 2. Press fan switch (2) and s 3. Press temperature contr temperature. 4. Press air conditioner sw switch ON. 5. Press RECIRC/FRESH s 6. Press mode selector swit 7. When the temperature i temperature control switc desired temperature. 8. When the AUTO switch location of the vents are a elector switch (5) to select RECIRC. ch (6) to set the vents to FACE.

nside the cab goes down, use the h and the fan switch to set to the is pressed, the temperature and utomatically selected. REMARK Note that if the temperature control switch is pressed to set the temperature to the lowest position, and th me with the air flow at "Lo", in rare cases, the evaporator may freeze. conditioner is run for a long ti me with the air flow at "Lo", in rare cases, the evaporator may If it freezes and no cold air co mes out, turn the air conditioner switch OFF, raise the tempe rature setting, run short time with the air flow at "Hi", then turn the air conditioner switch ON again.