. OPERATION OPERATION STARTING IN COLD WEATHER WARNING is completed. Ambient temperature Lighting time Above -4 ° C 0 seconds -4 ° C to -15 ° C 5 seconds to 30 seconds Below -15 ° C 30 seconds 2. When preheating pilot lamp (2) goes out, turn the key in starting switch (1) to the START position (C). Keep the key in starting switch (1) at the START position (C) to keep the starting motor running until the engine starts. 3. The starting motor will continue to turn and the engine will start. 3 - 121 Sit dow n in the op erator's sea t before s tarting t he engin e. Do not attempt to start the eng ine by short-circui ting the engin e starting circuit.
Suc h an a ct may caus e serious bodily in jury or f ire. Check t hat t here are no perso ns or obstacles in the surrounding a rea, the n sound the ho rn and start the engine. Exhaus t gas is to xic. When st arting th e engine in confined s paces , be particularly carefu l to ensure good ventilation. NOTI CE Do not s uddenly a ccelerate the engine b efore the warming-up operation Whe n startin g the engine afte r the machine h as been left f or more than half a day in temperat ures near -20°C, it wil take time for the e ngine to ac hieve complete combustion, so operate the starting switch as f ollows. 1. T urn the key in starting s witch (1) to ON position (B).
the ambient t emperatur e is low, the pre heating pilot lamp (2) ghts up and a utomatic pr eheating is carri ed out. Keep the key starting switc h (1) at the ON position unt il the preheating pilot mp (2) goes out. The time th at th e preheatin g pilot lamp ( 2) stay s lig hted up depends on t he am bient temp erature as show n in th e tabl e on the right.