. OPERATION OPERATION OPERATIONS AND CHECKS AFTER STARTING ENGINE WARNING BREAKING-IN THE MACHINE CAUTION NORMAL OPERATION 3 - 124 If ther e has been any abnormal actua tion or trouble, turn the start ing switch key to the If the work equipment is operated w ithout warming the machine up sufficiently, the re sponse of the work e quipment to the ment of the control lever will be slow and the work equipmen t may n ot respond as the operator desires, so always carry e warming-up operation. Partic ularly in cold areas, be sure t o carry out the warm -up operation complet Your Kom atsu machine has been thorou ghly adjusted and tested befo re shipment.
Howeve r, operating the machi ne under severe condition s at the beginning can advers ely affect the performance an d shorten the machin Be sure t o break-in the machine for the initial 100 hours (as indicated by the service mete During b reak-in operations, follow the p recautions described in this manual Idle t he engine for 5 minutes afte r starting it up. s or at high speeds. Avoid operation with heavy load Imme diately after starting the eng ine, avoid sudden starts, s udden acceleratio n, unnecessary sud den stops, and sudd en changes in direction. After sta rting the engine, do not im mediately start operations. First, perform the following operation s and checks.
NOTICE Do not su ddenly accelerate the engine b efore the warming-up operati complete d. Do not ru n the engine at low idle or high idle continuously for more th minutes. If it is nec essary to run the engine at idl e, apply a load from time to tim run the e ngine at a mid-range speed. 1. Dep ress accelerator pedal (1) lig htly and run the engine wit load at midrange speed for abo ut 5 minutes.