. MAINTENANCE GUIDES TO MAINTENANCE CHECK SERVICE METER: meter reading every day to see if the time has come for any necessary maintenance to be KOMATSU GENUINE OILS: Use Komatsu genuine oils and grease. Choose oils and grease with proper viscosities specified for ambient temperature. 4 - 2 GUIDES TO MAINTENANCE Do no t perform any inspection a nd maintenance oper ation tha t is not foun Check the servi perfor KOMATSU GENUINE REPLACEMEN T PARTS: Use K omatsu ge nuine parts spe cified in the Parts Bo ok as replacement p ALWAYS USE CLEAN WASHER FLU ID: Use a utomobile window washer fluid, and be careful not to let any dirt get ALWAYS USE CLEAN OIL AND GRE ASE: Use cl ean oil an d grease.
Also, keep the containers o f the oil a nd grease clean. Keep foreign materials away from oil and grease. CHECKING FOR FOREIGN MATERIALS IN DRAINED OIL AND ON FILTERS: After o il is chang ed or filters are r eplaced, check the old oil and fi lters for me tal particles and for eign materials . If l arge quanti ty of meta l particles or foreign materials are found, always report to the person in charge, and carry out harge, an arry suitab le action. FUEL STRAINER: Do no t remove t he strainer from the filler port when a dding fue WELDING INSTRUCTIONS: Cut off power . Wait for appro x.
one minute after tur ning off t he engine starting switch key, and then disconnect the negative ( -) terminal of th e battery. V continuously. hin 1 m (3.3 ft) of the area to be welded. If grounding cable is connected near , the instruments may malfunction. Do not apply more than 200 Co nnect grounding cable wit hin 1 m (3.3 inst ruments, c onnectors, etc. , the instruments may malfunction. If a seal or be aring happens t o come between the p art being welded an d grounding point, change the grounding poi nt to avoid such parts. he work equipment pins or the hydraulic cylinders as the grounding point.
Do not use th e area around t he work equipment pi ns or the hydraulic c ylinders as the gro unding point. DO NOT DROP THINGS INSIDE MAC HINE: Wh en openin g inspection win dows or the oil filler p ort of the tank to ca rry out inspection, be careful not to drop nut If s lea s, bolts, or tools inside the machine. uch things are dropped ins ide the machine, it ma y cause damage an d/or malfunction of the machine, an d will d to failure . If you drop an ything inside the mac hine, always remove it immediately. r inspection. Do not put un necessary thing s in your pockets. C arry only things whic h are necessary fo