. MAINTENANCE SERVICE PROCEDURE CHECK TRANSMISSION OIL LEVEL, ADD OIL WARNING (F). drain the excess oil from drain 4 - 24 The p arts and o il are at high t emperatu re immediat ely after the engin e is stopped , and may cause burns . Wait for the temperature to go down bef ore starting th Carr y out this procedure i f there i s any sign of oil on the transmission c ase, or if there is oil mixed with the cooling wate 1. Start the engine and r un it for at least 5 minutes 2. Open the cap of oil fill er port (F ), remove dipstick (G) , and wipe he oil off with a cloth. 3. Fully inse rt dipstick (G ) into fil ler pipe, th en remove 4.
The oil lev el should be betwe en the H an d L marks o n dipstick G). f the oil le vel is below the L m ark, add oi l through oi l fille r port 5. I plug (P), and check th e oil lev f the oil le hen tight