Komatsu — EVERY 4000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK FOR LOOSE ENGINE HIGH-PRESSURE PIPING CLAMPS, HARDENING OF RUBBER CHECKING FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER 4 - 65 Check visuall y and touch by hand to check that there is no hardening of the rubber and no loos e bolts o f the mounting clamps (2 places) for the high-pressurepiping bet ween the supply pump and the common rail. I f ther e are any problems , the parts must be replaced. In this case, please ask your Komatsu distributor to carry out carry replacement.

The fuel s pray prevention caps (12 places) on the fuel inject ion piping and both ends of the high-pressure pipin g act to prevent the fuel from coming into contact with high-temp erature parts of the engine and causing a fire if the fuel should lea k or spray out. Check visually and touch by hand to check that there are no missing caps, loose bol ts or hardening of t arts must be replaced. In this case, please ask your your Komatsu