REFERENCE ONLY ;;; '" x OX.FLUIO ·19·03MAR93 OX.PAINT ·19·03MAR93 140497 PN=19 If an accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed within a few hours or gangrene may result. Doctors unfamiliar with this type of injury should reference a knowledgeable medical source. Such information is available from Deere & Company Medical Department in Moline, Illinois, U.S.A. Do all work outside or in a well ventilated area. Dispose of paint and solvent properly. If you use solvent or paint stripper, remove stripper with soap and water before welding. Remove solvent or paint stripper containers and other flammable material from area.
Allow fumes to disperse at least 15 minutes before welding or heating. 11 Escaping fluid under pressure can penetrate the skin causing serious injury. Search for leaks with a piece of cardboard. Protect hands and body from high pressure fluids. REMOVE PAINT BEFORE WELDING OR HEATING Hazardous fumes can be generated when paint is heated by welding, soldering, or using a torch. • If you sand or grind paint, avoid breathing the dust. Wear an approved respirator. Avoid the hazard by relieving pressure before disconnecting hydraulic or other lines. Tighten all connections before applying pressure. AVOID HIGH-PRESSURE FLUIDS Avoid potentially toxic fumes and dust.
Remove paint before welding or heating: