REFERENCE ONLY S11,OMOE,AW ·19-09JUN94 140497 PN=46 ~ u w o ..., ~ :Z Engine Operating Guidelines IMPORTANT: Before stopping an engine that has been operating at working load, idle engine at least 2 minutes at 1000-1200 rpm to cool hot engine parts. Engines in generator set applications, where the governor is locked at a specified speed and no slow idle function is available, should be unloaded and idled for at least 2 minutes at high idle. 3. Turn key switch to "OFF" position to stop the engine. Remove ignition key. IMPORTANT: Make sure that exhaust stack cap (rain cap) is installed when engine is not running. This will prevent water and dirt from entering engine. 38 1.
Pull PTO clutch lever (arrow) rearward (away from engine) to disengage clutch. 2. Move the throttle lever (A) to slow idle on standard (mechanical) governor engines. STOPPING THE ENGINE