REFERENCE ONLY 140497 PN=64 S55,OMLM,S ·19·21DECB9 S11,OMLM,DS -19-10MAY91 Lubrication and Maintenance/600 Hr11- Yr 1. Check the clamps (A) on the piping which connect the air cleaner to the engine. Tighten the clamps as necessary. This will help prevent dirt from entering the air intake system through loose connections causing internal engine damage. 2. If engine has a rubber dust unloader valve, inspect the valve on bottom of air cleaner for cracks or plugging. Replace as necessary. 56 IMPORTANT: Thoroughly clean all dirt from inside of canister before removing secondary element. 5. Remove retaining nut (A) and secondary element (8).
Replace secondary element with new element immediately to prevent dust from entering air intake system. 6. Install new primary element and tighten wing nut securely. Install cover assembly and tighten retaining wing nut securely. CHECK AIR INTAKE SYSTEM