John Deere Series 300 (3029,4039,4045,6059,6068) — John Deere Series 300 (3029,4039,4045,6059,6068) User Manual

REFERENCE ONLY 140497 PN=92 Check water temperature with thermometer and replace, if necessary. Continued on next page See your authorized servicing dealer or engine distributor. See your authorized servicing dealer or engine distributor. See your authorized servicing dealer or engine distributor. See your authorized servicing dealer or engine distributor. See your authorized servicing dealer or engine distributor. Fill radiator to proper level, check radiator and hoses for loose connections or leaks. Adjust belt tension. Replace as required. Warm up engine to normal operating temperature. Check oil level. Add oil as required. Remove and check thermostat. Remove and check thermostat.

Use correct grade of fuel. Have serviceman check. Flush cooling system. Use proper fuel. Use proper fuel. Service air cleaner. Reduce load. Reduce load. Solution Troubleshooting Defective temperature gauge or sender. Defective injection nozzles. Clogged or dirty air cleaner. Turbocharger not functioning. Loose or defective fan belts. Cooling system needs flushing. 84 Low engine temperature. Incorrect grade of fuel. Engine emits white smoke Improper type of fuel. Defective thermostat. Engine out of time. Improper type of fuel. Engine overloaded. Injection nozzles dirty. Engine out of time. Engine overloaded. Faulty radiator cap. Low engine oil level. Defective thermostat. Low coolant level.

Symptom Problem Engine emits black or gray exhaust smoke Engine Overheats