1. “T” Handle Valve 2. Charging Valve Adapter 3. Manifold Outlet Valves (from gauge) 4. Inlet Valve (from regulator) 5. Regulator Valve (Nitrogen Pressure) 6. Manifold 7. Charging Pressure Gauge (Suspensions) 8. Dry Nitrogen Gas NOTE: Arrangement of parts may vary from illustration shown, depending on Charging Kit P/N. FAM0107 930E FIELD ASSEMBLY MANUAL Page 1-3 Safety Rules, Tools, & Equipment Part Num- ber Description Use EB1759 Nitrogen Charging Kit Suspension & Accumulator Nitrogen Charging Part Number Description Use EJ2626 (No longer available as complete unit) Roller Assy.
Power Module Remove & Install EJ2271 Roller Mount PC0706 Bearing TH9449 Bearing Retainer Ring TG1680 Roller Retainer Ring C1645 Capscrew 0.75 -10 NC x 2 1/4 in. C1542 Lockwasher 0.75 in. EH8686 Roller Ring