Komatsu — FINAL CHECK-0UT

FINAL CHECK-OUT Final check-out will require truck operation. The Operation and Maintenance Manual and safety manuals which are shipped with the truck should be located and placed in the operator cab, if not already there. Any personnel involved in the final check-out of the truck should read and understand all safety and operating instructions in the Operation and Maintenance Manual. 1. Acknowledgement of Receipt Form* 6. If not completed in earlier stages of assembly, make the following checks:

Electrical Propulsion Checkout Procedure (avail- able in service manual, Section "E") Hydraulic Checkout Procedure (available in ser- vice manual, Section "L") Steering & Brake Schematic (See schematic Section "R", of service manual) Hydraulic Brake Checkout Procedure (available in service manual, Section "J") Park Brake Installation & Adjustment Procedure (available in service manual, Section "J") 2. Service Report Form* 3. Receiving Inspection Report Form* 4. Field Assembly Inspection Report Form* (* supplied from factory; Complete these forms and return to the appropriate facilities.) 5.

Check all coolant and lubricants for proper levels and specifications; refer to 930E Lubrication and Service in the Operation and Maintenance Man- ual. Using only a qualified operator, operate the truck in a traffic-free area until safe operation has been assured. Release the truck for hauling, only after all checks have been completed, and all deficiencies corrected. FAM0903 930E FIELD ASSEMBLY MANUAL Page 9-1 Final Check-Out