FOREWORD This manual is provided to aid the service technician during field assembly of the standard KOMATSU 930E Dump Truck. Variations of design required for specific truck orders may require some modification of the general proce- dures outlined in this manual. All safety notices, WARNINGS, and CAUTIONS should be understood and followed when accomplishing assembly of the truck. The first section covers component descriptions, truck specifications and safe work practices, as well as other gen- eral information. The latter portion of the manual pertains to assembly and check-out.
The illustrations used in this manual are, at times, typical of the component shown and do not necessarily refer to any one particular truck model. This manual shows dimensioning of U.S. standard and metric (SI) units throughout and all location references to “front”, “rear”, “right”, or “left”, are made in respect to the operator's normal seated position. All maintenance personnel should read and understand the materials in the truck service manual before perform- ing maintenance and/or operational checks on the assembled truck. FAM0008 930E FIELD ASSEMBLY MANUAL i Introduction