TROUBLESHOOTING / Dr. ZX Operation 1. Connect Palm (Dr. ZX) to the diagnosing connector in the cab by using the Hot Sync cable and connecting harness. 2. Turn the key switch ON or start the engine. 3. When turning Palm ON, the following screen is displayed on the display of Palm. 1-1. Initial Screen Select Dr. ZX icon. 1-2. Password Setup Screen (When the password has unset) Set the password. 1-3. Service Software Selection Screen Select ZX-3 Mid. 1-4. Function Selection Screen Self-Diagnostic Result Select Controller 4. Select Self-Diagnostic Result and operate according to the instruction under display screen. Fuse Box Dr. ZX Connector + T4GB-05-01-007 + + Palm Dr.
ZX Hot Sync Cable Download Cable for Portable Communication T1V1-05-07-002 T5-2-2