hitachi — List of Fault Code of SattelliteCommunication Terminal

TROUBLESHOOTING / e-Wheel SATELLITE COMMUNICATION SYSTEM The satellite communication system is used for maintenance of the machine, “e-Service” by transmitting various data of the machine regularly via a low earth orbit satellite. Communication Aerial GPS Aerial NOTE: Depending on the circumstances of the machine (ex. in the constructions, in the tunnel, affected by the surrounding building and affected of noise), the data transfer rate may become slower, or the communication might not be established. The satellite communication system using a low earth orbit satellite transmits digital data through the radio wave.

If there is excessively noise or use of electrical equipment which causes noise near the machine, they cause reduces data transfer rate or communication might not be established at worst. The satellite communication system consists of satellite communication terminal, GPS aerial and communication aerial. The functions of each equipment are: Satellite Communication Terminal Receives the data from ICF and GPS aerial, and sends the data to the communication aerial. GPS Aerial Receives location information of the machine from a low earth orbit satellite. Communication Aerial Communicates the data with a low earth orbit satellite.

T4GB-05-07-001 Satellite Communication Terminal T4GB-05-07-002 T5-3-24