hitachi — CAN Harness Check

TROUBLESHOOTING / Troubleshooting A CAN HARNESS CHECK Check the wiring connections first. IMPORTANT: If the CAN harness is completely opened in circuit, the controller name is not displayed on the diagnosing screen on Dr. ZX (refer to T5-2-4). T5-5-54 Open circuit in CAN NO harness between MC and ECM. YES Check for continuity in CAN harness between MC and ECM. Check for continuity in CAN harness · Key switch: OFF · Refer to “CAN YES between MC and Check for continuity in monitor unit. YES Harness Continuity CAN harness between Check” on T5-5-58. · Key Switch: OFF MC and ICF. · Refer to “CAN Harness Continuity · Key switch: OFF Check” on T5-5-60.

· Refer to “CAN Harness Continuity Retry by using Dr. ZX. Open circuit in CAN Check” on T5-5-59. Check if fault code harness between MC and 11004-2 is displayed. NO ICF. Normal. NO Open circuit in CAN harness between MC and ECM. Normal. NO Check for continuity in CAN harness YES between MC and monitor unit. Check for continuity in CAN harness between YES MC and ICF.