TROUBLESHOOTING / Troubleshooting B RELATIONSHIP BETWEEN MACHINE TROUBLE SYMPTOMS AND RELATED PARTS This table indicates the relationship between machine trouble symptoms and the potential problem parts, which may cause trouble if failed, and the evaluation methods of these components. T5-6-2 Parts Function Symptoms in control system when trouble oc- curs. Symptoms in machine operation when trouble occurs. Forward/Reverse Lever • Sends the command signal on Forward/Reverse to MC. • Sends the signal on for- ward/reverse to the neutral relay. • Keeps MC in neutral when traveling. • Although the forward/reverse lever is operated, the ma- chine does not travel.
• Although the forward/reverse lever is in Reverse, the back- light and back buzzer are not operated. Shift Switch • Sends the command signal on speed gear to MC. • Particular speed gear only can be operated according to condition of the shorted or open circuit. • When the travel mode switch is manually operated, the machine can travel at par- ticular speed gear only. • When the travel mode switch is automatically operated, speed can be shifted to par- ticular speed gear only. Parking Brake Switch • Releases/applies the parking brake. • The parking brake cannot be released or applied. • Although the parking brake switch is OFF, the machine cannot operate in the forward or reverse direction.
• Although the parking brake switch is ON on the slope, the machine moves. Travel Mode Selector Switch • Sends the command signal on travel mode to MC. • MC makes only the travel mode in manual gear shifting operable. • When the automatic gear shifting is selected, the ma- chine can travel in the travel mode in manual gear shifting only. Work Mode Selector Switch • Sends the command siganl on work mode to MC. • MC keeps the work mode selector switch in Normal mode. • Although mode L has been used, fuel consumption sud- denly increases after certain week or month. • Machine operation may be normal according to the switch by which engine out- put is controlled to low at low speed gear.
Clutch Cut-Off Position Switch • Sends the command siganl on clutch cut-off to MC. • MC makes the clutch cut-off mode disabled. • Although mode S,N or D in the clutch cut-off mode switch is selected and the brake pedal is depressed, the clutch cut-off is not oper- ated. Down-Shift Switch Down-Shift/Up-Shift Switch • Sends the command signal on down-shift/up-shift switch to MC. (The circuit in down-shift switch is connected to that at down-shift side in down-shift/up-shift switch.) • MC makes down-shift/up-shift switch control disabled. • Although the down-shift/up-shift switch is pushed, down-shift/up-shift is not operated.
• Although the down-shift switch is pushed, down-shift is not operated. Hold Switch • Sends the command signal on hold switch to MC. • MC makes hold switch control disabled. • Although the auto spped gear shifting is selected and the hold switch is pushed, travel speed gear is not fixed.