hitachi — Relationship between Machine TroubleSymptoms and Related Parts

TROUBLESHOOTING / Troubleshooting B T5-6-14 Parts Function Symptoms in control system when trouble oc- curs. Symptoms in machine operation when trouble occurs. Steering Pilot Valve • Controls pilot pressure oil flow rate and direction to the steering valve spool end according to steering handle operating speed and direction. • Pilot pressure oil flow rate cannot be controlled properly. • According to malfunction, the troubles may occur including; although the steering handle is operataed fast, the steering is operated slowly, although the steering handle is operataed slowly, the steering is operated fast, and so on.

Ride Control Valve • Supplies lift arm cylinder bottom pressure to the accumulator through the chage cut-off spool with the ride control switch OFF. • Closes the charge cut-off spool and blocks the circuit to lift arm cylinder bottom side when accmulated pressure in the accumulator exceeds the specification. • Operates the solenoid valve by the command signal from MC, moves the main spool and connects the circuits between lift arm cylinder bottom side and accumulator, between lift arm rod side and hydraulic oil tank when travel speed reaches 7km/h or faster with the ride control switch ON. • Pressure cannot be accumulated in the accumulator.

• The solenoid valve and main spool cannot be controlled. • Ride control is not operated. (Shock when traveling is continued.) • Ride control does not stop. (Shock when traveling is always reduced.) Emergency Steering Pressure Switch • Is installed to emergency steering block in circuit upper between main pump and steering valve. • Sends the signal on steering circuit pressure to the monitor unit. • Steering circuit pressure cannot be detected. • Although there is no trouble in the steering circuit, the emergency steering pump is operated. Emergency Steering Pump Delivery Pressure Switch • Is installed to between emergency steering pump and emergency steering block.

• When pressure oil beyond specification from the emergency steering pump is supplied, the connection is broken and the monitor unit judges that the emergency steering switch is operated correctly. • The normal signal on pressure occurrence is not sent to the monitor unit. • Although the emergency steering pump auto check circuit is operated when the engine starts, the emergency steering pump indicator blinks. Hydraulic Fan Motor • Operates the flow rate adjustment solenoid valve by the command signal from MC. Controls pressure oil flow rate to the fan motor by operating the flow rate control valve. Increases or decreases cooling fan speed.

• Operates the reverse control solenoid valve by the command signal from MC. Shifts the outlet port for pressure oil to the fan motor by operating the reverse control valve. Switches the cooling fan in reverse rotation. • The flow rate control valve cannot be controlled. • The reverse control valve cannot be controlled. • Cooling fan speed cannot be controlled. • Cooling fan reverse control cannot be operated.