hitachi — Relationship between Machine TroubleSymptoms and Related Parts

TROUBLESHOOTING / Troubleshooting B T5-6-16 Parts Function Symptoms in control system when trouble oc- curs. Symptoms in machine operation when trouble occurs. Charging Block • Divides pilot pump pressure oil into the brake circuit and the pilot circuit effectively. • Accumulates pressure at outlets of brake circuit and pilot circuit and supplies stable pressure to both circuits. • Stable pressure cannot be supplied to the brake circuit or the pilot circuit. • The brake oil pressure indicator lights. • The parking brake cannot be released. • The front attachment/ steering are cylinders operated slowly. Priority Valve (Charging Block) • Is installed in the charging block.

Divides pilot pump pressure oil into the brake circuit and the pilot circuit effectively. • Stable pressure cannot be supplied to the brake circuit or the pilot circuit. • The brake oil pressure indicator lights. • The parking brake cannot be released. Primary Brake Pressure Sensor • Is installed in the charging block. Monitors accumulated pressure in the service brake accumulator. • Accumulated pressure in the the service brake accumulator cannot be detected. • The brake oil pressure indicator on monitor always lights. • Although the trouble in the service brake circuit due to pressure decrease, the brake oil pressure indicator on monitor does not light.

Service Brake Relief Valve • Is installed in the charging block. Is operated when accumulated pressure in the service brake accumulator exceeds the specification. • Supplies pilot pump delivery oil to the pilot circuit after the priority valve (charging block) is open. • Accumulated pressure in the the service brake accumulator cannot be controlled. • According to malfunction, the service brake efficinecy becomes bad or the parts in service brake circuit are damaged. • According to malfunction, the parking brake is completery not released or the parts in parking brake circuit are damaged. Pump Torque Control Proportional Solenoid Valve • Is installed in the charging block.

Is operated by the command signal from MC. • Supplies pilot pressure for pump delivery flow rate control to the main pump regulator. • Pilot pressure to the main pump regulator cannot be controlled and supplied. • According to malfunction, the troubles may occur including the front attachment/steering are operated slowly, the engine stalled during combined operation of front attachment and travel or engine idling, and so on. Parking Brake Solenoid Valve • Controls that the parking brake is applied or released. • The parking brake cannot be controlled to apply or release. • According to malfunction, the parking brake cannot be applied or released.

Parking Brake Pressure Sensor • Sends the signal on parking brake circuit pressure to MC. • Parking brake circuit pressure cannot be detected. • MC makes the parking brake indicator go off forcibly. • MC makes forward/reverse operation disabled when the parking brake is applied. • The machine cannot travel forwad/reverse. • The parking brake indicator does not light with the parking brake switch OFF. • Although the parking brake is applied, the machine can travel. Electromagnet in Pilot Valve • Fixes the control lever by the magnetic force when the electromagnet in pilot valve is magnetized and the control lever in pilot valve is moved to the detent position.

• The control lever in pilot valve is not fixed in the detent position. • Although the electromagnet in pilot valve is magnetized, the control lever is not fixed. Brake Valve • Supplies pilot pressure according to brake pedal depression from the outlet port and operates the service brake. • Pilot pressure cannot be controlled. • The service brake does not function.