hitachi — Engine System Troubleshooting

TROUBLESHOOTING / Troubleshooting B E-6 Engine stalls during operation under ad- verse condition such as at high altitude. Related MC Fault Code: 11004-2, 11910-2, 11209-3, 11209-4,11413-2, 11413-3,11413-4 Check the wiring connections first. Check if fuel system malfunctions, the fuel filter is clogged or the fuel pump is properly operated with the key ON. T5-6-40 Faulty pump delivery pressure sensor, im- YES plement pressure sensor or pump torque control sole- noid valve. Check if fault code 11204-3, 11204-4, NO 11209-3, 11209-4, 11413-2, 11413-3 or Faulty pump torque 11413-4 is displayed. Monitor pump torque NO control solenoid control solenoid valve valve, or open circuit · Engine:

Running output. Install a pres- in harness to MC. sure gauge to output port. Check pressure values NO on Dr. ZX and pres- sure gauge. Check if pressure in- creases or decreases Disassemble and Monitor actual engine with both pressure in check main pump speed. equal. YES regulator. Check if abnormal en- · Engine: Running gine speed is detected. · MC monitor item: Pump displacement proportional Engine: Running valve output MC monitor item: Actual · Refer to Operational Per- engine speed formance Test section. Refer to fault code YES 11004-2 in Trouble- shooting A. Check if fault code 11004-2 is displayed. YES YES Refer to Engine Trou- · Engine: Running bleshooting Manual.

Check if fault code NO 11910-2 is displayed. · Engine: Running Faulty MC. NO Faulty pump delivery pressure sensor, im- plement pressure sensor or pump torque control sole- noid valve. Faulty MC. NO YES Refer to Engine Trou- bleshooting Manual.