hitachi — Front Attachment SystemTroubleshooting

TROUBLESHOOTING / Troubleshooting B F-5 Front attachment drifts remarkably. Lift Arm Cylinder Internal Leakage Check 1. With the bucket cylinder slightly extended from the fully retracted position, lower the bucket tooth tips onto the ground. YES Normal. Replace with other overload relief valve temporarily. Check if symptom disappears. · Engine: Running · Refer to Operational Performance Test section. Check if cylinder drift in each front attach- ment is within speci- fication. NO Lock pilot shut-off valve. Check if symptom disappears. · Engine: Running NO · Engine: Running 2. Remove the hoses from the lift arm cylinder rod side. Drain oil from the hoses and cylinders.

(Plug the remove hose ends.) 3. Retract the bucket cylinder rod and lift the bucket off the ground. If oil flows out of the hose re- moved pipe ends and the lift arm cylinders are retracted at this time, oil leaks in the lift arm cyl- inders. In case no oil flows out of the hose re- moved pipe ends but the lift arm cylinders are re- tracted, oil leaks in the control valve. T4GB-05-04-001 T5-6-46 Faulty pilot valve. YES