hitachi — Front Attachment SystemTroubleshooting

TROUBLESHOOTING / Troubleshooting B F-8 Lift arm height kickout is not operated. Check the wiring connections first. Connector (Harness end of connector viewed from the open end side) Connect terminal #2 of harness end connector in electromagnet at lift arm raise side to vehi- cle frame. Raise and lower lift arm. While plate is located in front of proximity switch, check if there is continuity. Or while plate is away from proximity switch, check if there is dis- continuity. YES Faulty electromagnet at lift arm raise side.

Shorted or open circuit in harness between lift arm proximity switch and electromagnet at lift arm raise side, or open circuit in harness between lift arm proximity switch and ground. YES Disconnect connec- tor in lift arm prox- imity switch. Check for continuity in same procedures as former ones. Check if results are same to former ones. YES Disconnect connector in electromagnet at lift arm raise side in pilot valve. Ground termi- nal #1 of harness end connector to vehicle frame. Check if volt- age is 24 V. NO · Engine: Running · If one is YES, go to NO. · Engine: Running NO Faulty lift arm prox- imity switch. · Engine:

Running Faulty fuse or faulty harness between fuse box B and electro- magnet at lift arm raise side. NO Electromagnet Connector at Lift Arm Raise Side #2 #1 T5-6-51 1 2