hitachi — Brake System Troubleshooting

TROUBLESHOOTING / Troubleshooting B B-2 Parking brake is not locked. Check the wiring connections first. Disconnect connector in parking brake switch. Turn parking brake switch ON. Check for continuity between terminals #7 and #6 of switch end. YES NO Replace parking brake relay 2 with other general relay. Check if parking brake is operated properly. YES NO Faulty parking brake switch. · Engine: Running · Parking brake switch: ON Faulty parking brake re- lay 2. YES Monitor parking brake pressure of MC moni- tor item on Dr. ZX. Check if pressure is within specification. YES End. · Engine: Running · Parking brake switch: ON · Refer to Operational Per- formance Test section.

Refer to Troubleshooting C. Replace parking brake pressure sensor with normal one. Check if parking brake indicator lights. YES Check if parking brake indicator does not light. · Engine: Running NO NO NO Stuck piston in parking brake. Connector (Harness end of connector viewed from the open end side) Parking Brake Switch Connector Parking Brake Solenoid Valve Connector #2 #1 #6 #7 T5-6-80 4 1 10 5 1 2