hitachi — Brake System Troubleshooting

TROUBLESHOOTING / Troubleshooting B B-3 Service brake efficiency is bad or low. NO Faulty pilot pump. NO Disassemble, clean and adjust pilot relief valve. Check if brake is oper- ated properly. Monitor service brake pressure of monitor unit monitor item on Dr. ZX. Check if pressure is within specification. End. NO · Refer to the Operational Performance Test section. YES Check if pressures at ports BR1 and BR2 in brake valve are within specification. · Engine: Running · Specification: 11.8 to 14.7 MPa (120 to 150 kgf/cm 2 ) Faulty brake valve or faulty brake pedal. YES · Engine: Running · Brake pedal: Fully de- pressed · Specification: 4.18 ± 0.85 MPa (43 ± 9 kgf/cm 2 ) Faulty service brake.

YES T5-6-82