hitachi — Exchange Inspection

TROUBLESHOOTING / Troubleshooting B EXCHANGE INSPECTION Exchange inspection method is a troubleshooting method to find the trouble location by exchanging the suspected part / component with another part /component having identical characteristics. Many sensors and solenoid valves used on this ma- chine are identical. Therefore, by using this switch-check method, faulty part /component, and/or harness can be easily found. Example: Abnormal pump delivery pressure sensor high voltage (MC fault code: 11204-3) Check Method: 1. Stop the engine. Release remained pressure in the hydraulic oil tank. (Purge the hydraulic oil tank if possible.) 2. Replace two pressure sensors as illustrated.

(Main Pump) T4GB-05-06-010 CAUTION: If the sensors are removed, hy- draulic oil may gush out. Take a good care and use the oil pan. 3. Start the engine. Retry troubleshooting. Result: In case abnormal parking brake pressure sensor high voltage is displayed (MC fault code 11313-3), the pressure sensor is considered to be faulty. In case abnormal pump delivery pressure sensor high voltage is displayed (MC fault code 11204-3), the pump delivery pressure sensor harness is considered to be faulty. (Charging Block) T4GB-01-02-013 T5-6-109