hitachi — Malfunction of Fuel Gauge

TROUBLESHOOTING / Troubleshooting C MALFUNCTION OF FUEL GAUGE Check the wiring connections first. YES Disconnect fuel sensor. Connect terminal #1 to terminal #2 of harness end connector by using a clip. Check if pointer swings to (FULL) side. Fuel gauge pointer does not move at all. Disconnect connector 2-A in monitor unit. Check if voltage at terminal #8 of monitor end connector is 5 V. · Key switch: ON NO T5-7-10 YES Fuel gauge pointer swings over Disconnect fuel sensor. scale. Check if pointer returns to zero. · Key switch: ON Disconnect connector 2-A in monitor unit. NO Check if voltage at terminal #8 of monitor end connector is 5 V. Disconnect connector 2-A in monitor unit.

Check if voltage at terminal #8 of monitor end connector is 5 V. Disconnect fuel sensor. Connect terminal #1 to terminal Fuel gauge pointer keeps mov- #2 of harness end connector by ing unstably. using a clip. Check if pointer swings and is stabilized to (FULL) side. · Key switch: ON YES NO