TROUBLESHOOTING / Troubleshooting C MALFUNCTION OF TRANSMISSION WARNING INDICATOR Although the fault code is not displayed in MC and if the trouble occurs, conduct this remedy. Check the wiring connections first. NO YES Disconnect connector B in MC. Connect terminal #24 of harness end connector to vehicle frame. Check if indicator lights. When key switch is turned to ON posi- tion, check if indica- tor lights. · Key switch: ON · Without disconnecting con- nector, connect to vehicle frame by using a clip from the rear of connector. YES Connect the disconnected connector. Connect terminal #15 of connector 1-A in monitor unit to vehicle frame. Check if indicator lights.
Although transmis- sion is abnormal, indicator does not light. NO T5-7-26 YES Disconnect con- Although transmis- nector B in MC. sion is not abnormal, YES Check if indicator indicator lights. goes out. · Key switch: ON Disconnect connector · Engine: Stopped 1-A in monitor unit. NO Check if indicator goes out. NO NO