hitachi — Malfunction of Overheat Indicator

TROUBLESHOOTING / Troubleshooting C MALFUNCTION OF OVERHEAT INDICA- TOR Check the wiring connections first. YES Disconnect connector of overheat switch. Connect terminal of harness end to vehicle frame. Check if indicator lights. YES Connect the discon- nected connector. Connect terminal #7 of connector 1-A in monitor unit to vehicle frame. Check if indicator lights. · Key switch: ON Indicator does not light although engine overheats. Check if indicator lights when key switch is turned to ON position. NO · Key switch: ON · Without disconnecting connector, connect connector to vehicle frame by using a clip from the rear of con- nector. · Key switch:

ON NO T5-7-32 YES Disconnect termi- Indicator lights al- nal of overheat though coolant switch. YES temperature is low. Check if indicator goes out. Disconnect connec- tor 1-A in monitor · Key switch: ON unit. · Engine: Stopped NO Check if indicator goes out. · Key switch: ON NO YES NO NO