TROUBLESHOOTING / Troubleshooting C MALFUNCTION OF ENGINE WARNING INDICATOR Although the fault code is not displayed in ECM and if the trouble occurs, conduct this remedy. Connector (Harness end of connector viewed from the open end side) YES Faulty ECM. ECM Connector A Monitor Unit Connector 2-B #21 T1GR-05-04-002 T4GB-05-05-002 T5-7-34 Disconnect con- YES Faulty ECM. nector A in ECM. Connect terminal YES #6 of harness end Disconnect Open circuit in connector to vehi- connector 2-B YES harness between cle frame. in monitor unit. ECM and monitor Check if indicator Connect termi- unit. Although engine is When key switch is lights.
NO nal #21 of abnormal, indicator turned to ON posi- monitor end to does not light. tion, check if indi- vehicle frame. Faulty monitor unit. cator lights. Check if indi- NO cator lights. Faulty monitor unit, or burnt indi- NO cator light. YES Faulty ECM. Faulty monitor unit, or burnt indi- cator light. Disconnect con- Although engine is nector in ECM. Shorted circuit in not abnormal, in- Check if indicator YES harness between dicator lights. goes out. ECM and monitor unit. · Key switch: ON Disconnect connector · Engine: Stopped 2-B in monitor unit. NO Check if indicator goes out. Faulty monitor unit. NO Faulty monitor unit. NO #6