TROUBLESHOOTING / Troubleshooting C MALFUNCTION OF EMERGENCY STEERING INDICATOR (Optional) After checking if the fault code is not displayed on Troubleshooting by Dr. ZX, conduct this remedy. Connect connector of check switch. Disconnect connector 1-A in monitor unit. Connect terminal #14 of harness end connector to vehicle frame. When check switch is turned ON, check for continuity. YES To A YES Although emer- gency steering check switch is pushed, emergency steering pump unit is not operated. Disconnect connec- tor of check switch. Check for continuity between terminals #2 and #4 of check switch end connec- tor.
Open circuit in harness between emergency steering check switch and monitor unit. NO Faulty emergency steer- ing check switch. · Key switch: ON NO Faulty alternator system. Refer to remedy for Mal- function of Alternator In- dicator in this group. YES Although engine starts, inspection of emergency steering pump unit is not automatically oper- ated. After checking monitor unit light, check if al- ternator indicator lights. · Engine: Running NO To A YES Faulty emergency steer- ing check switch, or shorted circuit in harness between check switch and monitor unit. When key switch is turned ON, emer- gency steering pump unit is running and does not stop. Disconnect connector 1-A in monitor unit.
Check if pump unit stops. Shorted circuit in harness between emergency steering relay and monitor unit, or faulty monitor unit. YES · Key switch: ON Disconnect connector 2-A in monitor unit. Check if pump unit stops. NO NO To C T5-7-44