hitachi — Malfunction of Discharge WarningIndicator

TROUBLESHOOTING / Troubleshooting C MALFUNCTION OF DISCHARGE WARN- ING INDICATOR Check the wiring connections first. NOTE: *Terminals L in the alternator are wa- ter-resistant type connectors so that it is not practical to measure voltage at these ter- minals. Measure voltage at terminal R in safety relay. Check for continuity between terminal R in safety relay and terminal L in the alternator first. Between 12 V and 35 V Between 12 V and 35 V YES Check voltage at terminal L in *alternator. · Engine: Running Less than 12 V or 35 V or higher Although charging is low, alternator indicator does not light. When key switch is turn to ON position, check if indicator lights. NO · Key switch:

ON NO T5-7-48 Between 12 Check voltage at ter- V and 35 V minal #2 of connector 2-A in monitor unit. Measure voltage at When engine starts, terminal L in *alter- · Engine: Running Less than 12 V or alternator indicator nator. 35 V or higher does not go off. · Engine: Running Less than 12 V or 35 V or higher Less than 12 V or 35 V or higher YES Check if en- gine starts.