TROUBLESHOOTING / Electrical System Inspection INSTRUCTIONS FOR DISCONNECTING CONNECTORS Push, Unlock and Separate Type Pull and Separate Type NOTE: Connectors will not be easily separated even if the lock is pushed while being pulled. Push the lock first before pulling the connectors. The lock is located on female side con- nector (harness end side). T107-04-05-004 IMPORTANT: Before pulling and separating, re- lease the lock of connector in the solenoid valve by using a pair of pincers. T107-04-05-002 Raise Lock, Pull and Separate Type T107-04-05-003 T4GB-05-06-003 T5-8-3