TROUBLESHOOTING / Electrical System Inspection FUSIBLE LINK INSPECTION Inspection 1. Open either battery box cover from left and right of the machine. Remove the negative cable from the battery. 2. Open the engine cover on left side of the ma- chine with the front attachment side forward. 3. Remove bolts (M10) (2 used) from the L type cover. Remove the cover. There are fusible links (65A) (2 used). 4. Open the black box. There are fusible links (50A) (2 used) (100A in total). 5. Visually inspect the fusible link. 6. Install the negative cable to the battery. Replacement 1. Check if the negative cable is removed from ei- ther battery box from left and right of the ma- chine. 2.
Open the engine cover on left side of the ma- chine with the front attachment side forward. 3. Remove bolts (M10) (2 used) from the L type cover. Remove the cover. There are fusible links (65A) (2 used). 4. Open the black box. There are fusible links (50A) (2 used) (100A in total). 5. Pull out and replace the fusible link. 6. Install the negative cable to the battery. T4GB-05-06-004 T4GB-05-06-008 Fusible Link (100A) Fusible Link (65A) T5-8-8