hitachi — Alternator Check

TROUBLESHOOTING / Electrical System Inspection ALTERNATOR CHECK In general, the alternator indicator remains off when the alternator is generating power. If the alternator indicator comes on while the engine is running, the alternator may be faulty. How to Check Alternator 1. Turn the key switch to the ON position. Confirm that the alternator indicator comes on. 2. Measure voltage between terminals B and E of the alternator. If the measured voltage is around 24 V, the al- ternator circuit can be considered normal. If the measured voltage is low, a shortage in bat- tery capacity or looseness of the wire connectors of alternator circuit might be cause of the mal- function.

When voltage is 0 V, the wiring between fuse box and alternator or the ground line to alternator might be open circuit. 3. Next, start the engine and measure voltage gen- erated while as the alternator rotates. As described above, measure voltage between terminals B and E on the end of alternator. If voltage is around 28 V, the alternator is operat- ing normally. If the measured voltage is equal to battery volt- age (around 24V), there is some trouble with the alternator or the regulator. T4GB-05-06-006 T5-8-10 B E