Page 7-132 Section 7 – Adjustment, Repair, and Replacement CFP83 Series Fuel Drain Lines Removal/Installation (Cont) Remove the banjo capscrew and sealing washers at the fuel filter head. Clean WARNING When using solvents, acids, or alkaline materials for cleaning, follow the manufacturer's recommendations for use. Wear goggles and protective clothing to avoid personal injury. WARNING Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause bodily injury. Wash the low-pressure fuel lines in solvent. Dry the fuel lines with compressed air. Inspect for Reuse Inspect the fuel drain lines for cracks and other damage.
Inspect the fuel drain manifold banjo connections. NOTE : The banjo connection seals must be discarded when removed. Drawing No. 9777, Section 7, Rev. 02-07