Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Section 7 – Adjustment, Repair, and Replacement Page 7-159 CFP83 Series Air Intake Manifold Removal/Installation (Cont) Pressure Test Install the pressure gauge to the fitting in the turbocharger outlet. Install another pressure gauge, in the intake manifold. Operate the engine at rated rpm and load. Record the readings on the two gauges. If the differential pressure is greater than 21 kPa [3 psi], check the charge air cooler for plugging. Clean or replace if necessary. Temperature Differential Test Install a temperature gauge in the intake manifold. Lock the fan drive in the ON mode to prevent erratic test results. Operate the engine at rate rpm and load.

Record the intake manifold temperature. Drawing No. 9777, Section 7, Rev. 02-07