Section 7 – Adjustment, Repair, and Replacement Page 7-191 CFP83 Series Lubricating Oil Pan Removal/Installation Refer to Lubricating Oil Pan (100-007-025) in C Series Troubleshooting and Repair Manual, Bulletin No. 3666003. Prepare Drain WARNING Some state and federal agencies in the United States of America have determined that used engine oil can be carcinogenic and can cause reproductive toxicity. Avoid inhalation of vapor, ingestion, and prolonged contact with used engine oil. WARNING Hot oil can cause serious personal injury. NOTE: Use a container that can hold at least 20 liters [15 qt] of lubricating oil. Operate the engine until the coolant temperature reaches 60°C [140°F].
Shut off the engine. Remove the oil drain plug. Drain the oil immediately to be sure all the oil and suspended contaminants are removed from the engine. Remove Remove the lubricating oil pan and gasket. If the suction tube must be removed. Refer to Procedure 007-035. Drawing No. 9777, Section 7, Rev. 02-07