Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Section 12 – Troubleshooting Page 12-3 CFP83 Series Troubleshooting Procedures and Techniques General information This guide describes some typical engine operating problems, their causes, and some acceptable corrections to those problems. WARNING Performing troubleshooting procedures NOT outlined in this in Section can result in equipment damage or personal injury or death Troubleshooting must be performed by trained, experienced technicians. Consult a Cummins Authorized Repair Location for diagnosis and repair beyond that which is contained in this manual, and for symptoms not listed in this in section. Follow the suggestions below for troubleshooting:

Before beginning any troubleshooting, refer to the General Safety Instructions in Section 1 of this manual. Study the complaint thoroughly before acting. Refer to the Engine Identification diagrams in Section 2, the System Diagrams in Section 6, and the Assembly Drawings in Section 13. Do the easiest and most logical things first. Find and correct the cause of the complaint. Troubleshooting Symptoms Charts WARNING Troubleshooting presents the risk of equipment damage, personal injury or death Troubleshooting must be performed by trained, experienced technicians. Use the charts on the following pages of this section to aid in diagnosing specific engine symptoms.

Read each row of blocks from top to bottom. Follow through the chart to identify the corrective action. Drawing No. 9777, Section 12, Rev. 02-07