Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 12-16 Section 12 – Troubleshooting CFP83 Series Coolant Temperature Below Normal (Engine Off) Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction The 120 VAC power supply to the coolant heater is not connected. Connect the power supply. Correct any electrical faults in the supply circuit. The heater’s overload thermostat has operated. Ensure that there is coolant in the heater. Allow time for the automatic overload reset to occur. Coolant temperature sender is malfunctioning. Replace the temperature sender. Refer to Coolant Temperature Sender Removal/Installation in Section 7. Coolant temperature gauge is malfunctioning. Replace the temperature sender.

Refer to Coolant Temperature Sender Removal/Installation in Section 7. Coolant is not free to circulate through the heater. Ensure that the coolant hoses are clear. Refer to Coolant Hose Removal/Installation in Section 7. The coolant heater has failed electrically. Replace the coolant heater. Refer to Coolant Heater Removal/Installation in Section 7. Contact a Cummins Authorized Repair Facility.