Section 12 – Troubleshooting Page 12-43 CFP83 Series Engine Acceleration or Response Poor (Cont) Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Fuel supply line restriction between the fuel pump and the injectors. Check the fuel supply line from the fuel pump to the cylinder head for sharp bends that can cause restrictions. Refer to Fuel Supply Lines (006-024) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Fire pump is not correctly sized for the engine. Check for correct pump sizing. Air intake or exhaust leaks. Inspect the air intake and exhaust systems for air leaks.
Refer to Air Leaks, Air Intake and Exhaust Systems (010-024) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Fuel injection pump timing is not correct. Put the engine at top dead center. Check and adjust the fuel timing. Refer to Fuel Injection Pumps, In-Line (005-012) or Fuel Injection Pump, In-Line, Spill Port Timing (005-013) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Fuel injection pump is malfunctioning. Replace the fuel injection pump.
Refer to Fuel Injection Pumps, In-Line (005-012) or Fuel Injection Pump, In-Line, Spill Port Timing (005-013) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Fuel pre-filter is clogged. Clean the customer-supplied fuel pre-filter.