Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 12-56 Section 12 – Troubleshooting CFP83 Series Engine Runs Rough or Misfires Under Load (Cont) Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Fuel pump return overflow valve is malfunctioning. Inspect the return overflow valve. Replace if necessary. Refer to Fuel Return Overflow Valve (006- 044) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Calibrate the fuel pump. The fuel lift pump is malfunctioning. Inspect the fuel lift pump. Replace if necessary. Refer to Fuel Lift Pump (005-045) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Calibrate the fuel pump. Fuel injection pump timing is not correct.

Put the engine at top dead center. Check and adjust the fuel timing. Refer to Fuel Injection Pumps, In-Line (005-012) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Calibrate the fuel pump. Valves are not sealing correctly. Check and adjust the valves. Refer to Overhead Set (003-004) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Calibrate the fuel pump. Injectors are worn or malfunctioning. Check the injectors and replace any malfunctioning injectors. Refer to Injector (006-026) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Calibrate the fuel pump. Engine compression is low.

Perform the compression check to identify the malfunction. Correct as required. Refer to Section 9.