Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Section 12 – Troubleshooting Page 12-61 CFP83 Series Engine Speed Surges Under Load Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Pump suction head or pump discharge head changes. Some variation in speed response to load changes is normal. Excessive speed changes may occur upon sudden failures in either suction or discharge piping systems. Fuel level is low in the tank. Fill the fuel tank. Fill and bleed the fuel lines to the engine. Air is in the fuel supply to the engine. Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe and fuel filters as necessary. Vent air from the system. Refer to Air in Fuel in Section 7.

The fuel filter is plugged. Replace the fuel filter. Refer to Change Fuel Filter in Section 7. Fuel flow to the engine is not adequate. Locate and correct the restriction in the customer- supplied fuel lines to the engine. The fuel lift pump is malfunctioning. Check the fuel lift pump for correct operation. Check the pump output pressure. Replace the fuel lift pump if necessary. Refer to Fuel Lift Pump Removal/ Installation in Section 7. Fuel grade is not correct for the application or the fuel quality is poor. Operate the engine with the required fuel. Refer to Fuel Recommendations and Specifications in Section 10.